Radial Workhorse TankDriver Balanced Spring Reverb Interface at Gear 4 Music

This Season, our Partner Gear 4 Music is providing our Artists with this Radial Workhorse TankDriver Balanced Spring Reverb Interface. This will be a great addition to your Musical Room. Underneath the Soundwave Art Canvas, there is a closet that is waiting for this Workhorse TankDriver Balanced Spring Reverb Interface.

Radial Workhorse TankDriver Balanced Spring Reverb Interface in the category

Potential Applications Spring Reverb From A Broken Amplifier: If you happen to own an old guitar amp that is equipped with a spring reverb tank but the amp itself doesnt work the TankDriver can help. Simply remove the reverb tank from the amp and connect the send and receive jacks to the input and output of the tank (most tanks are clearly marked to distinguish between the input and the output sockets) Spring Reverb From A Fender Twin: Simply disconnect the two RCA connectors going to the spring reverb and connect the TankDriver to the tank. Different amplifiers generally use different tank designs. Smaller tanks will have a shorter decay Stereo Set-Up: Take a pre-recorded stereo track and send it through two TankDrivers. This retains the full stereo effect and lets you alter the reverb tank to create unique spatial effects Features 500 Series module that enables you to drive a balanced line-level signal through a guitar amplifier reverb tank Add unique spring reverb effects to your recordings Optimized drive circuit for low noise Transformer-coupled output driver with normal and high settings for new and old spring reverbs alike Separate drive and return controls for signal optimization Two tone controls for adjusting high-end shimmer and low-frequency boom Less noise and wider bandwidth from your spring reverb tank Can be used with a wide variety of sound sources Works with all spring reverb tanks with an input impedance of 600 Ohms of greater (lower impedance will result in a signal that is far too low to be usable) Full-size through-hole 100 percent discrete electronics for optimal signal transfer All components are hand-selected Road-proven Radial push switches with extra-durable metal outer casings rated at over 20000 cycles Incredibly robust double-layer steel front panel Dual potentiometers with double-up solder points for greater durability Potentiometers feature steel casings steel shafts and steel retention nuts Transformer-isolated design eliminates hum and buzz caused by ground loops Gold-plated 15-pin card edge with a double-sided design ensures a positive connection to the receptacle for improved mating Military-spec circuit board with double-sided design and a full ground plane that assures the lowest possible noise Specifications Circuit Type – Drive: Opamp with discrete transistor-isolated output Maximum Input – Rear Panel XLR Input: +19dBu Maximum Output – Rear Panel XLR Output: +26dBu Dynamic Range – Drive Section: 101 to 115dB (varies with frequency) Frequency Response: Shaped for spring reverb tanks Gain – Drive With Boost Selected: +10dB (when activated) Input Impedance: Front Panel Receive Input: 10K Ohms unbalanced Rear Panel XLR Input: 15K Ohms balanced Dry Intermodulation Distortion: 0.0028 percent Wet Intermodulation Distortion: 0.0021 percent Noise – Drive Section: -100dB (below 0dBu) Omniport Function: Line-level unbalanced effects loop (tip send – ring receive) Front Panel Output Impedance: 1.5K Ohms Rear Panel XLR Output Impedance: 200 Ohms Power Requirement: 65mA (maximum all LEDs) THD + N – Receive Section: <0.01 percent at -30dBu input level Conditions: For use in dry locations only between 5°C and 40°C Weight: 0.7kg / 1.5lbs Controls & Connectivity Blend: Sets the balance between the dry signal and the wet reverb Drive: Increases the output going to the reverb for less sensitive input circuits Omni Insert: Sends the signal to the Imniport TRS on the Workhorse which in this case is a send and receive insert jack Shimmer: Increases the high frequency tone of the wet reverb circuit Boom: Increases the low frequency tone of the wet reverb circuit Send: Output connection that goes to the reverb tank Recv: Return path from the reverb tank to the TankDriver Omniport: TRS insert jack with tip-send ring-return. Only on Workhorse

You can also learn to play this Radial Workhorse TankDriver Balanced Spring Reverb Interface on our Music Online Training section.

About Radial

Even with advanced Radial manufacturing techniques, it isn’t possible to automate the production of great instruments like this Radial Workhorse TankDriver Balanced Spring Reverb Interface. The complexity of the task, combined with the need for constant awareness of the materials being used and the ability to adjust for minute variations, means that there is no substitute for the skill and sensitivity of experienced craftspeople.

Turning designs into great instruments isn’t easy. Technical drawings can’t convey the intended tone of an instrument, or the construction methodology required to create the desired characteristics and sound. Before building a new guitar can begin, the plans and intentions of the designers are discussed with the craftspeople at the factory in order to develop an appropriate production process. Every guitar is different, and coming up with the ideal production methodology and workflow for each guitar is critical.

The Yamaha Philosophy is the philosophical framework that forms the foundation for business management at the Yamaha Group. The Yamaha Philosophy is made up of the “Corporate Philosophy,” “Customer Experience,” “Yamaha Quality,” and the “Yamaha Way.”

The Corporate Philosophy and Customer Experience express different aspects of the meaning behind the existence of the Yamaha Group, while the Yamaha Philosophy serves as its foundation.

Yamaha Quality and the Yamaha Way serve as the driving force behind the Yamaha Philosophy, and are intended to offer guidance for Yamaha Group employees in their daily work.

We utilize the Yamaha Philosophy as a foundation to draw from, and try to think from the customer’s viewpoint as we build on unique expertise and sensibilities, as well as the reputation for unparalleled reliability gained during our long history. Our goal in doing so is to consistently provide high quality products and services that exceed the expectations of our customers, and to create excitement and cultural inspiration together with people around the world.

About Gear 4 Music

Launched in 2003 and now with over 1.3 million registered customers, our AWIN Partner Gear4music.com is a leading retailer of musical instruments and music equipment. You can buy music gear from orchestral instruments to rock ‘n’ roll, including guitars, drum kits, digital pianos, saxophones and cellos, plus leading recording and studio equipment.

From starter guitars to pro microphones and amps, the Gear4music.com online music shop has a huge range of music equipment available. Whether you’re looking for a violin, keyboard, electronic drum kit or PA system, we can help.

We’ve got some of the biggest brands in stock, including Yamaha, Roland, Casio, Fender, Ibanez, Alesis, Behringer & Gibson, as well as our own great value Gear4music music product range. On Soundorabilia, you will only find Acoustic Guitars related items like this Radial Workhorse TankDriver Balanced Spring Reverb Interface.

To receive excellent service and a great price on your next musical instrument purchase, try us now!