This Season, our Partner Gear 4 Music is providing our Artists with this Electro-Voice RE3-RE520 Single Handheld Wireless Mic Set Band 5L. This will be a great addition to your Musical Room. Underneath the Soundwave Art Canvas, there is a closet that is waiting for this RE3-RE520 Single Handheld Wireless Mic Set Band 5L.
Electro-Voice RE3-RE520 Single Handheld Wireless Mic Set Band 5L in the category
Find your voice Vivid full and detailed. The Electro-Voice RE3-HHT520 Handheld Wireless Transmitter is the ultimate wireless microphone for your EV wireless system. With its premium RE520-RC3 condenser microphone head you can take advantage of a sound signature with outstanding clarity and presence. The supercardioid polar pattern provides exceptional isolation and feedback control whilst a switchable HPF lets you eliminate unwanted LF content in an instant. The transmitter itself boasts a rugged all-metal body and is powered by two AA (alkaline or rechargeable NiMH) batteries. Syncing the transmitter with your receiver is quick and easy thanks to an intuitive ultrasonic sync function. With a wide selection of frequency tuning options you can avoid a diverse range of potential interference sources. And with a commonly-used coupling convention adapting your favourite microphone heads for use with the transmitter is a breeze. Simple set-up The RE3 receiver gives you true plug-and-play usability. Frequency scan and sync functions cut down on lengthy set-up times. Meaning youre ready to go in an instant. While a radio-link between transmitter and receiver ensures clear audio and reliable performance. Every single time. Whats in the box? RE520-RC3 Wireless Head with RE520 Capsule RE3-HHT Handheld Transmitter RE3-RX Diversity Receiver Features Frequency scanning lets you ensure there are free frequencies Sync function lets you connect transmitter and receiver in seconds Shock mounted capsule greatly reduces handling noise during performance Excellent speech intelligibility thanks to the large diaphragm Robust construction throughout with metal bodies and dent resistant grille Specifications RE3-RX RE3 receiver Frequency oscillation mode: Phase-locked loop (PLL) Sync frequency: Ultrasonic 40 kHz Diversity: Antenna diversity Bandwidth: 36MHz Signal/Noise ratio: >100dB(A) Total harmonic distortion (THD): <0.6-percent at 1kHz Receiving sensitivity: -81dBm for -12dB SINAD Frequency response: 63Hz to 16kHz±2dB (BPT) 51Hz to 16kHz±2dB (HHT) Antenna type: Detachable 1/2 wave with BNC connector Antenna booster power: DC12 – 15V/100mA Function display by: LCD Control functions: Power scan frequency group channel squelch TX sensitivity TX attenuation TX RF power TX auto off TX key lock TX display info TX sync configuration RX output volume RX output level RX antenna booster power RX key lock RX display contrast RX display brightness RX system reset. Sync data options: Frequency group channel sensitivity level attenuation status RF power auto off status key lock status transmitter display (freq or Gp/Ch) Audio frequency output impedance: 240 Ohms (unbalanced) 1400 Ohms (balanced) Squelch and noise muting: Noise muting and tone code locking Output ports: 1 x balanced XLRM jack 1 x unbalanced 1/4 TS (6.3mm) jack Power supply: DC12 15V/500mA Finish: Black polyurethane paint Dimensions: 47 mm x 210 mm x 175 mm Net weight: 1.23 kg Gross weight: 1.49 kg RE3-HHT RE3 handheld transmitter Frequency oscillation mode: Phase-locked loop (PLL) Sync frequency: Ultrasonic RF power output: 10mW and 50mW (Low and High) Display by: LCD + LED Function controls: Power mute group channel frequency sensitivity adjustment RF power auto off key lock. RF stability: <±10kHz at Fc Modulation frequency shift: Wideband FM ±48kHz deviation Harmonic radiation: <-50dBc Battery: 2 x AA alkaline battery or NiMH rechargeable battery Charging contacts: Yes Microphone coupling: 1.25 diameter 28 UN-2A thread pitch Microphone electrical contact: 3-ring/3-pin Finish: Black polyurethane paint Height: 191mm Width at threaded end: 37mm Width at control cover: 22mm Net weight (without head): 346 g Gross weight (without head): 480 g RE520-RC3 Wireless Head with RE520 Capsule Element Type: Self-biased condenser Frequency Response: 40 Hz to 20 kHz Polar Pattern: Supercardioid Sensitivity open circuit voltage at 1 kHz: 5.6 mV/Pascal (-45 dBV/Pa) Clipping (max SPL): 139 dB SPL (1-percent THD) Self Noise: 22 dB SPL “A” weighted (0 dB=20 µPa) Dynamic Range: 117 dB Signal-to-Noise Ratio: 72 dB Output Impedance: 1000 Ohms Power Requirements: 4-8 VDC phantom power Polarity: Positive pressure on diaphragm produces positive voltage at centre contact relative to ground contact Electrical Contact: 3-Ring/3-Pin Threaded Coupling: 1.25 diameter 28 UN-2A thread pitch Finish: Black polyurethane paint Materials: Aluminium steel steel wire grille screen Dimensions: 85.3 mm x 49.6 mm Weight: 130 g
You can also learn to play this Electro-Voice RE3-RE520 Single Handheld Wireless Mic Set Band 5L on our Music Online Training section.
About Electro-Voice
Even with advanced Electro-Voice manufacturing techniques, it isn’t possible to automate the production of great instruments like this Electro-Voice RE3-RE520 Single Handheld Wireless Mic Set Band 5L. The complexity of the task, combined with the need for constant awareness of the materials being used and the ability to adjust for minute variations, means that there is no substitute for the skill and sensitivity of experienced craftspeople.
Turning designs into great instruments isn’t easy. Technical drawings can’t convey the intended tone of an instrument, or the construction methodology required to create the desired characteristics and sound. Before building a new guitar can begin, the plans and intentions of the designers are discussed with the craftspeople at the factory in order to develop an appropriate production process. Every guitar is different, and coming up with the ideal production methodology and workflow for each guitar is critical.
The Yamaha Philosophy is the philosophical framework that forms the foundation for business management at the Yamaha Group. The Yamaha Philosophy is made up of the “Corporate Philosophy,” “Customer Experience,” “Yamaha Quality,” and the “Yamaha Way.”
The Corporate Philosophy and Customer Experience express different aspects of the meaning behind the existence of the Yamaha Group, while the Yamaha Philosophy serves as its foundation.
Yamaha Quality and the Yamaha Way serve as the driving force behind the Yamaha Philosophy, and are intended to offer guidance for Yamaha Group employees in their daily work.
We utilize the Yamaha Philosophy as a foundation to draw from, and try to think from the customer’s viewpoint as we build on unique expertise and sensibilities, as well as the reputation for unparalleled reliability gained during our long history. Our goal in doing so is to consistently provide high quality products and services that exceed the expectations of our customers, and to create excitement and cultural inspiration together with people around the world.
About Gear 4 Music
Launched in 2003 and now with over 1.3 million registered customers, our AWIN Partner Gear4music.com is a leading retailer of musical instruments and music equipment. You can buy music gear from orchestral instruments to rock ‘n’ roll, including guitars, drum kits, digital pianos, saxophones and cellos, plus leading recording and studio equipment.
From starter guitars to pro microphones and amps, the Gear4music.com online music shop has a huge range of music equipment available. Whether you’re looking for a violin, keyboard, electronic drum kit or PA system, we can help.
We’ve got some of the biggest brands in stock, including Yamaha, Roland, Casio, Fender, Ibanez, Alesis, Behringer & Gibson, as well as our own great value Gear4music music product range. On Soundorabilia, you will only find Acoustic Guitars related items like this Electro-Voice RE3-RE520 Single Handheld Wireless Mic Set Band 5L.
To receive excellent service and a great price on your next musical instrument purchase, try us now!