This Season, our Partner Gear 4 Music is providing our Artists with this Electro-Voice RE3-HHT520 Handheld Transmitter and RE520 Head Band 8M. This will be a great addition to your Musical Room. Underneath the Soundwave Art Canvas, there is a closet that is waiting for this RE3-HHT520 Handheld Transmitter and RE520 Head Band 8M.
Electro-Voice RE3-HHT520 Handheld Transmitter and RE520 Head Band 8M in the category
RE520-RC3 Wireless Microphone Head Vivid sound tough build condenser response and quality. It all adds up to an incredible microphone head for your wireless system. Easily-adapting to your RE3-HHT handheld transmitter body the RE520 head gives you great performance with astounding flexibility and power. With its intelligent design the head gives you a detailed sonic signature that is full and vivid with a warm and clear low-end natural and present mid-range and an open and crisp high-end. The element delivers a rich and detailed frequency response with excellent tonal balance and a very fast transient response. And with a handy switchable high-pass filter built into the head you can eliminate unwanted low-frequency content (below 150Hz) in an instant. Plus with a tough Memraflex grille and multi-stage pop filter you dont have to worry about plosives and breath blasts or nasty dents in the grille. Versatile Handheld Transmitter Robust and reliable. The RE3-HHT combines professional performance with a lightweight and ergonomic design. With a commonly-used thread pattern (1.25 diameter 28 UN-2A thread pitch) for coupling microphone heads you can easily adapt a wide variety of microphone heads to fit the transmitter to suit your needs. The transmitter itself boasts a robust and durable all-metal body providing excellent reliability in even the most demanding of environments. The RE3-HHT is also extremely-easy to power using two AA alkaline or rechargeable NiMH cells. You can also take advantage of an intuitive ultrasonic sync function enabling you to sync your transmitter to your receiver with precise frequency tuning alongside other functional data. You also have plenty of frequency tuning options available allowing you to avoid a plethora of potential interference sources. Plus with handy charging contacts you can use your transmitter with NiMH batteries (not included) and recharge them with ease using the Electro-Voice BC2 charging station (not included). This lets you charge your batteries without having to remove them from the transmitter itself. 823 – 832MHz and 863 – 865MHz Wireless Bands The 863 – 865MHz band is license free across most of Europe ideal for any small-scale application such as bands or public speakers who just need one channel without paying a license fee. For larger organisations or applications where a license may be required for insurance or other monitoring purposes licenses for the 823 – 832MHz band are available from local authorities in many countries. Please see the attached PDFs for further licensing information. In every case this information acts only as a guide. Please contact your local licensing authority if you require a license or further information on licensing in your area. In the Box RE3-HHT Handheld Transmitter RE520-RC3 Microphone Head Microphone Stand Adapter 2 x AA Batteries Features Handheld UHF transmitter with an RE520 supercardioid condenser microphone head Premium condenser element for a highly-detailed full and vivid sound Elegant delivers the lyrical finesse required for expressive vocal performances Exceptional control over off-axis sound from nearby sources Outstanding acoustic control with excellent presence thanks to a supercardioid polar pattern Multi-stage pop filter prevents detrimental results from breath blasts and plosives Selectable high-pass filter (located under the grille) reduces undesirable LF content when engaged When selected the HPF attenuates frequencies below 150Hz Pairs perfectly with the RE3-RX Diversity Receiver (not included) Quick and simple setup using the RE3 clear frequency scan and sync functions Rock-solid system performance with an ultra-reliable link between your transmitter and receiver Robust metal body for long-term durability on stage and on the road Commonly-used 1.25 diameter 28 UN-2A thread pitch microphone head coupling Accepts a wide range of microphone heads that use this common coupling convention Operates on 2 x AA alkaline or rechargeable NiMH cells Generous frequency tuning options to help avoid various sources of possible interference Recharging contacts provide functional use with the optional BC2 charging station (not included) BC2 allows you to use NiMH rechargeable cells within two transmitters and charge them without removing them from the transmitters Specifications RE3-HHT520 Handheld Wireless Transmitter Microphone Head: RE520 Frequency Oscillation Mode: Phase-locked loop (PLL) Operating Frequency: Band Name: 8M Tuning Bandwidth: 11MHz total split into two separate bands 9MHz 2MHz Frequency Range: Two separate frequency ranges 823MHz to 832MHz 863MHz to 865MHz Selectable Frequencies: 440 Sync Frequency: Ultrasonic RF Power Output: 10mW Display and Indicators: LCD + LED Function Controls: Power Mute Group Channel Frequency Sensitivity adjustment RF power Auto off Key lock RF Stability: <±10kHz at Fc Modulation Frequency Shift: Wideband FM ±48kHz deviation Harmonic Radiation: <-50dBc Battery: 2 x AA alkaline battery or NiMH rechargeable battery Charging Contacts: Yes Microphone Head Coupling: 1.25 diameter 28 UN-2A thread pitch Microphone Electrical Contact: 3-ring/3-pin Finish: Black polyurethane paint Dimensions: Without head Height: 191mm / 7.52 Width at Threaded End: 37mm / 1.46 Width at Control Cover: 22mm / 0.856 Weight: 346g / 12.2oz. (without head) RE520-RC3 Wireless Microphone Head Element Type: Self-biased condenser Frequency Response: 50Hz – 20kHz Polar Pattern: Supercardioid Sensitivity: 5.6mV/Pascal (-45dBV/Pa) (open circuit voltage at 1kHz) Maximum SPL: 139dB (1-percent THD) Self Noise: 22dB SPL A-weighted (0dB = 20µPa) Dynamic Range: 117dB Signal-to-Noise Ratio: 72dB Output Impedance: 1000 Ohms Power Requirements: 4 – 8 VDC phantom power Polarity: Positive pressure on diaphragm produces positive voltage at centre contact to ground contact Electrical Contact: 3-ring/3-pin Threaded Coupling: 1.25 diameter 28 UN-2A thread pitch Finish: Black polyurethane paint Length: 3.36 / 85.3mm Diameter: 1.95 / 49.6mm Weight: 130g / 4.6oz.
You can also learn to play this Electro-Voice RE3-HHT520 Handheld Transmitter and RE520 Head Band 8M on our Music Online Training section.
Even with advanced Electro-Voice manufacturing techniques, it isn’t possible to automate the production of great instruments like this Electro-Voice RE3-HHT520 Handheld Transmitter and RE520 Head Band 8M. The complexity of the task, combined with the need for constant awareness of the materials being used and the ability to adjust for minute variations, means that there is no substitute for the skill and sensitivity of experienced craftspeople.
Turning designs into great instruments isn’t easy. Technical drawings can’t convey the intended tone of an instrument, or the construction methodology required to create the desired characteristics and sound. Before building a new guitar can begin, the plans and intentions of the designers are discussed with the craftspeople at the factory in order to develop an appropriate production process. Every guitar is different, and coming up with the ideal production methodology and workflow for each guitar is critical.
The Yamaha Philosophy is the philosophical framework that forms the foundation for business management at the Yamaha Group. The Yamaha Philosophy is made up of the “Corporate Philosophy,” “Customer Experience,” “Yamaha Quality,” and the “Yamaha Way.”
The Corporate Philosophy and Customer Experience express different aspects of the meaning behind the existence of the Yamaha Group, while the Yamaha Philosophy serves as its foundation.
Yamaha Quality and the Yamaha Way serve as the driving force behind the Yamaha Philosophy, and are intended to offer guidance for Yamaha Group employees in their daily work.
We utilize the Yamaha Philosophy as a foundation to draw from, and try to think from the customer’s viewpoint as we build on unique expertise and sensibilities, as well as the reputation for unparalleled reliability gained during our long history. Our goal in doing so is to consistently provide high quality products and services that exceed the expectations of our customers, and to create excitement and cultural inspiration together with people around the world.
About Gear 4 Music
Launched in 2003 and now with over 1.3 million registered customers, our AWIN Partner Gear4music.com is a leading retailer of musical instruments and music equipment. You can buy music gear from orchestral instruments to rock ‘n’ roll, including guitars, drum kits, digital pianos, saxophones and cellos, plus leading recording and studio equipment.
From starter guitars to pro microphones and amps, the Gear4music.com online music shop has a huge range of music equipment available. Whether you’re looking for a violin, keyboard, electronic drum kit or PA system, we can help.
We’ve got some of the biggest brands in stock, including Yamaha, Roland, Casio, Fender, Ibanez, Alesis, Behringer & Gibson, as well as our own great value Gear4music music product range. On Soundorabilia, you will only find Acoustic Guitars related items like this Electro-Voice RE3-HHT520 Handheld Transmitter and RE520 Head Band 8M.
To receive excellent service and a great price on your next musical instrument purchase, try us now!